spridgets
[Top] [All Lists]

Re: clutch slave cyl & gearbox bracket [pulling engine]

To: spridgets@Autox.Team.Net
Subject: Re: clutch slave cyl & gearbox bracket [pulling engine]
From: "Matt Liggett" <mliggett-receive-spridgets@elise.kiva.net>
Date: 26 Jan 1998 17:55:13 -0000
References: <2.2.32.19980126141127.00980fa0@pop.uunet.ca>
Reply-to: "Matt Liggett" <mliggett-receive-spridgets@elise.kiva.net>
Sender: owner-spridgets@Autox.Team.Net
Brian Evans wrote:
> It's easier, IMHO, to remove the engine and gear box separately. Just
> undo the bolts that hold the tranny to the engine, and wiggle, and
> it'll come loose.  Make sure to support the front of the tranny.  Once
> the engine is out of the way, the slave cylinder is easy to get to.

Thanks for the tip Brian.  I already pulled the whole lot together.
Maybe next time I'll try them separately.
-- 
        Matt Liggett, SysAdmin
        Kiva Networking

  [ --> Spammers please send to spam@elise.kiva.net to be blocked <-- ]

<Prev in Thread] Current Thread [Next in Thread>