Gregory Kirk wrote:
> Converting to steel whelles whould require modifications to the front
> end, and replacement of the rear end with one from a steel wheeled car,
> on the other hand it you're just looking to ditch the wires, the
> inexpensive and labour gree conversion would be to get a set of
> minilites. I beleive Victoria British carrie a set of four that will
> work with your whire wheel hubs for under $500.
I think they're considerably more than that. And, this will do you no
good if the splines on the ends of your axleshafts are worn. Mine are.
Listen for a clunk when you go and stop. :-/
--
Matt Liggett, SysAdmin
Kiva Networking
[ --> Spammers please send to spam@elise.kiva.net to be blocked <-- ]
|