I need some help! The Spitbits online catalogue shows a clutch pin
and a sleeve. It has been a long time since I looked at these parts
in person and I don't recall anything resembling a sleeve. Also I
don't recall exactly how the pin is held in place, whether it is by
friction to the fork pin or friction to the bell housing. I'm hoping
I can install a new pin without cracking the bell housing from the
block. But if a sleeve is supposed to reside within the holes in the
pin, I'm not sure there is one now, which means I may have to pull
the thing apart after all. What I see now (by mirror) is a hole in
the bell housing and holes just about the same diameter in the clutch
arm. Am I missing something???
Tanks!
--
Jim Muller
jimmuller@rcn.com
'80 Spitfire, '70 GT6+
--
Version: 7.5.472 / Virus Database: 269.8.17/850 - Release Date: 6/15/2007 11:31
AM
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|