In a message dated 11/3/2004 7:07:07 AM Eastern Standard Time,
jblair1948@cox.net writes:
> >I'm suspicious that I might have bent the wire coil enough
> >to touch it to the box. The only thing is that I have disconnected the
> green wire to the heater so
> >AFAIK that should not be the reason that it still blows
> >the fuse.
>
> If the resistor is touching the metal heater box, then
> it could still be shorting out. Removing the power from
> the fan is after the resistor. So there is power to the
> resistor, but just no place for it to go unless the
> coils are touching a ground.
>
> John
>
Hmmm... sounds like I really need to get in there and check that. I will let
you all know what I find.
Stay tuned for our next electrifying episode....
Tom B.
|