Hi Everybody,
Thanks for all the responses.
I have received several emails regarding my voltmeter reading wrong. All but
one suggested the same possible solution. That being I may have hooked the
voltmeter up through the voltage regulator.
Well, I am glad to say that we all think along the same lines, as that was also
my first thought.
I guess I should have said that when I checked the reading I hooked my VOM up
in the same place as the voltmeter was hooked up. The VOM reads about 2 volts
higher than the voltmeter. IIRC the regulator averages about 10v but varies
some. But I think my VOM would still show about 10v.
The other response suggested there is a resistor that may be adjustable. So I
guess I may tear apart the gauge to see what I can see.
Thanks,
Roger Elliott
|