Since the front and rear A-arm mounts (to the chassis)
are different (pivot axes are different heights),
possibly they were reversed upon reassembly?
(The Factory Shop Manual calls these items "wishbone
fulcrum brackets")
Carter Shore
--- "Pettis, Ward (NIDCD)" <pettisw@ms.nidcd.nih.gov>
wrote:
> OK, on the suggestion of Doug Braun, I checked the
> vertical links last
> night. The angle of the threaded portion points to
> spot off the edge of the
> upper mount. This appears to be true on both sides.
> Seems if both are
> identical, it's the right angle. But logically, it
> should be lined up with
> the upper mount.....How could both be bent
> identically? A Cast Iron V8
> dropped into the front by accident??
>
> Ward
> '76 Spit
Make a great connection at Yahoo! Personals.
http://personals.yahoo.com
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
|