spitfires
[Top] [All Lists]

Re: rebuilding spitfire waterpump

To: "Brad Kahler" <brad.kahler@141.com>, Triumphs@autox.team.net
Subject: Re: rebuilding spitfire waterpump
From: "Peter C." <nosimport@mailbag.com>
Date: Wed, 16 Feb 2000 08:42:52 -0600
Brad,
        It is actually an integrated shaft bearing assembly somewhat unique to
water pumps and fairly specific to this range of Triumph pumps. The seal is
a mechanical carbon faced seal running on the impeller face. Not hard to
rebuild if you invest in some jigs and pump bearings. If I remember
correctly the pulley end is a different diameter shaft from the impeller
end. Not really off -the- shelf parts, unless the shelf is at a pump
rebuilder's shop.
        Peter C
---
At 02:40 AM 2/16/2000 , Brad Kahler wrote:
>
>Listers,
>
>Has anyone tried rebuilding a spitfire waterpump by just buying the 
>bearings and seals locally?  I'm assuming that there are 2 bearings and 2 
>seal plus a shaft.  
>
>Any help would be appreciated.
>
>Brad  (Lincoln Nebraska 402-464-1502)


<Prev in Thread] Current Thread [Next in Thread>