At 07:17 PM 2/5/00 -0600, you wrote:
>
>Hi All
> I have disassembled my 74's Master Brake Cylinder. I can not get
>the
>rear piston shaft out. Its feels as though there is something holding it
>in place.
>
>I push it back with a screw driver. Then let go. It springs forward a
>bit and stops
>as if there were a circlip there stopping it
Pat,
There is a pin that is holding it. You have to pull the resivor and under
the back port there is a rubber washer. Under that is the pin. It will
pull right out. I had the same problem. Took me forever to figure it out.
John
John T. Blair WA4OHZ email: jblair@exis.net
Va. Beach, Va Phone: (757) 495-8229
48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V
75 Bricklin SV1 77 Spitfire
Morgan: www.team.net/www/morgan
Bricklin: www.bricklin.org
|