----- Original Message -----
From: <clubairth@bellsouth.net>
To: "Alan Fanning" <Awfanning@earthlink.net>; "SHOtimes"
<shotimes@autox.team.net>
Sent: Tuesday, June 27, 2006 11:32 AM
Subject: Re: [Shotimes] coolant hose availability
> Alan:
> We (the SHO community) are down to only 5 out 10 molded hoses being
> available for the SHO. Either MTX or ATX. RCM has the five that I know are
> still available. The two big upper and lower radiator hoses. The U-shaped
> oil cooler hose and the two heater hoses that attach to the heater core at
> the firewall.
> http://home.earthlink.net/~rcm_automotive/id15.html
>
> Josh at SHO nut has only 3 hoses listed anymore.
> http://www.shonutperformance.com/
>
> Cincy SHO (are they part of Bittersweet now?) has only the two big
> radiator hoses.
> http://www.cincysho.com/Taurus_SHO/Ford_SHO_Catalog/60k-Maintenance.htm
>
> I recently just went through a total hose replacement. I brought the 5 old
> hoses not available down to the local O'Reilly auto parts store and just
> matched up shapes as best I could and then cut them to fit. Not perfect
> but it's all we have. Last time I checked Ford had nothing available.
> .
> .
>
>
>
>> There are two coolant hoses on the radiator side of the engine, one a
>> short
>> u-shaped piece that starts and ends adjacent to the oil filter, and one
>> that
>> starts up by the t-stat area and terminates near the oil filter. Does
>> anyone know if either or these is available aftermarket? Or still
>> available
>> From Ford?
>>
>> Thx.
>>
>> Alan
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
|