shotimes
[Top] [All Lists]

Re: [Shotimes] FW: No Start Condition

To: "Dave Kegel" <d.kegel@comcast.net>, <shotimes@autox.team.net>
Subject: Re: [Shotimes] FW: No Start Condition
From: "K. Angermeier" <kickinsho@charter.net>
Date: Wed, 13 Sep 2006 21:07:08 -0500
No, I too am on Shotimes yet.  I cannot handle all of the different lists to 
be on now.  Someday but it will not be today.

Dave, if the light goes out I have a flashlight!

Kris Angermeier
Sheboygan, WI

'91 Plus Wht/Blk
'91 Plus Wht/Blk (crushed)
'93 Ultra Red ATX

"Women Who Behave Never Make History"
----- Original Message ----- 
From: "Dave Kegel" <d.kegel@comcast.net>
To: <shotimes@autox.team.net>
Sent: Wednesday, September 13, 2006 2:29 PM
Subject: RE: [Shotimes] FW: No Start Condition


> Everyone has moved on to the yahoo group.  I'm the only one keeping the
> light on. :)
>
> If it won't even crank, it's generally the starter, battery, or ignition
> switch.  None of those other thing (DIS, CPS, etc) have anything to do
> with it.
>
> Dave
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net
> [mailto:shotimes-admin@autox.team.net] On Behalf Of Beisler Jonathon -
> Jacksonville
> Sent: Wednesday, September 13, 2006 1:30 PM
> To: shotimes@autox.team.net
> Subject: [Shotimes] FW: No Start Condition
>
>
> So, not one comment or idea on this?  I can't have stumped all of
> you....
>
>
>
>> Okay, this involves the 94 ATX that I sold last year.  The person is
> describing to me what sounds like a crank sensor failure.  The car will
> sometimes start, sometimes not.  It's not related to heat though.
> Sometimes the car will start when cold sometimes hot.  There really
> isn't a pattern. The difference that I can think of is that it didn't
> really happen for a month or more and then it started happening more
> frequently.  Now the car is dead in the water.  It won't crank or
> anything, so I'm thinking there might be more wrong.  The dealer she
> went to said that the entire wiring harness was bad.  I can't imagine
> that.  If the DIS module was loose, it wouldn't keep the car from
> cranking would it?  I know it's hard to diagnose something from third
> party ramblings, but does anyone have any ideas that I might suggest to
> her? She's moved to Birmingham, and I'm in Florida, so I can't even get
> a look at the car myself.  The crank sensor is two years old and about
> 40,000 miles.  I replaced everything on the front at that time.  They
> usually last longer than that, yes?  She mentioned that she had the
> transmission rebuilt right before this started, is there something that
> could have been pulled loose or not reconnected that could have caused
> this?
>> Thanks for any ideas,
>> JB
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes

<Prev in Thread] Current Thread [Next in Thread>