> On Mar 23, 2021, at 17:42, Bob Spidell <bspidell@comcast.net> wrote:
>
> A while back, I bought some 3/16" brake pipe from Amazon. The best offer
> was for galvanized pipe, so I bought it. Now, I'm wondering if galvanized is
> a bad idea, though I can't say why (presumably it helps prevent surface
> rust). Anybody used it, or know of any issues with it?
>
Galvanized is the standard for most automakers these days. Itâ??s fine. Tends
to be hard to bend, but easy to flare.
Historically, steel tubing was made by rolling a copper coated steel strip
into a double wall tube, and electrically brazing it. It was then terne
coated. Trrme is lead with just enough tin in it so it sticks to steel. Itâ??s
no longer available, so the tube is electro galvanized, I think only on the
outside.
Most aftermarket brake tubing is a different steel alloy, coated in polyvinyl
fluoride. Itâ??s easier to bend, and has reasonable corrosion resistance.
For a regular car, Iâ??d have no problem using either. For something you are
keeping forever, Iâ??d use stainless, if you can get a premade set, or kunifer
(nicopp is one brand). If you live in salt land, Iâ??d probably use nicopp for
everything.
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net
|