This is a multi-part message in MIME format.
--===============7536119164929017794==
boundary="------------90DAD5FE408838C33255CBCE"
Content-Language: en-US
This is a multi-part message in MIME format.
--------------90DAD5FE408838C33255CBCE
Content-Transfer-Encoding: 8bit
If you are looking at strap hinges, can you use regular door hinges? It
wouldn't be rigid, but may work depending on the need. If you want to go
with strap hinges, just grind off the end of the pin so it comes out and
perhaps use the right diameter nail in place of the hinge pin.
Another option might be to saw a groove in the top of bottom of each
panel and use something like
https://www.homedepot.com/p/Simpson-Strong-Tie-12-Gauge-Angle-A33/100374962
to lock the panels together. This would require that the connecting
edges be mitered.
My final thought is a segment of straight bar and an offset bar. On one
edge, you would put the offset brackets and the other panel would have
straight brackets. Basic graphic of the offset bracket below.
 |
 |
 |
--
|
|
|
Think of a smaller version of a bracket where you would drop a 2x4
across a door to block it closed. Hope that makes sense.
Brian
On 8/15/2019 8:31 PM, Steve Hammatt, Mount Vernon WA USA via Shop-talk
wrote:
> Iâ??m looking for something to temporarily connect a pair of 2â?? thick
> panels (3â??x 6â??) to form
> a right angle. Inexpensive and easily knocked apart for quick
> assembly and teardown.
> Panels weigh nearly 100 lbs each. First thought was strap hinges with
> removable pins.
> Strangely I havenâ??t seen anything with removable pins, they mostly say
> non-removable.
> Maybe something like a fitting thru a slot with a tapered wedge acting
> as a pin, like
> maybe in concrete form assembly.....? But havenâ??t seen anything that
> would work.
> I only need two, this is a one-time build and it will be used in the shop!
> Thanks for any ideas.
> Steve Hammatt
> Mount Vernon WA USA
> www.leatherplates.com <http://www.leatherplates.com>
>
>
>
>
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/bk13@earthlink.net
>
--------------90DAD5FE408838C33255CBCE
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
If you are looking at strap hinges, can you use regular door
hinges? It wouldn't be rigid, but may work depending on the need.Â
If you want to go with strap hinges, just grind off the end of the
pin so it comes out and perhaps use the right diameter nail in place
of the hinge pin.<br>
<br>
Another option might be to saw a groove in the top of bottom of each
panel and use something like
<a class="moz-txt-link-freetext"
href="https://www.homedepot.com/p/Simpson-Strong-Tie-12-Gauge-Angle-A33/100374962";>https://www.homedepot.com/p/Simpson-Strong-Tie-12-Gauge-Angle-A33/100374962</a>
to lock the panels together. This would require that the connecting
edges be mitered.<br>
<br>
My final thought is a segment of straight bar and an offset bar. On
one edge, you would put the offset brackets and the other panel
would have straight brackets. Basic graphic of the offset bracket
below.<br>
<br>
 |<br>
 |<br>
 |<br>
--<br>
|<br>
|<br>
|<br>
<br>
Think of a smaller version of a bracket where you would drop a 2x4
across a door to block it closed. Hope that makes sense.<br>
<br>
Brian<br>
<br>
<div class="moz-cite-prefix">On 8/15/2019 8:31 PM, Steve Hammatt,
Mount Vernon WA USA via Shop-talk wrote:<br>
</div>
<blockquote type="cite"
cite="mid:F97D4D573830458EAD44C9349B8E9521@DESKTOPTOA1F5G">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<div dir="ltr">
<div style="FONT-SIZE: 12pt; FONT-FAMILY: 'Calibri'; COLOR:
#000000">
<div>Iâ??m looking for something to temporarily connect a pair
of 2â?? thick panels (3â??x 6â??) to form </div>
<div>a right angle. Inexpensive and easily knocked apart for
quick assembly and teardown.</div>
<div>Panels weigh nearly 100 lbs each. First thought was
strap hinges with removable pins.</div>
<div>Strangely I havenâ??t seen anything with removable pins,
they mostly say non-removable. </div>
<div>Maybe something like a fitting thru a slot with a tapered
wedge acting as a pin, like </div>
<div>maybe in concrete form assembly.....? But havenâ??t seen
anything that would work.</div>
<div>I only need two, this is a one-time build and it will be
used in the shop!</div>
<div>Thanks for any ideas.</div>
<div>Â </div>
<div style="FONT-SIZE: 12pt; FONT-FAMILY: 'Calibri'; COLOR:
#000000">Steve Hammatt<br>
Mount Vernon WA USA<br>
<a href="http://www.leatherplates.com";
moz-do-not-send="true">www.leatherplates.com</a></div>
<div style="FONT-SIZE: 12pt; FONT-FAMILY: 'Calibri'; COLOR:
#000000"><br>
<br>
<br>
 </div>
</div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre"
wrap="">_______________________________________________
<a class="moz-txt-link-abbreviated"
href="mailto:Shop-talk@autox.team.net";>Shop-talk@autox.team.net</a>
Archive: <a class="moz-txt-link-freetext"
href="http://www.team.net/pipermail/shop-talk";>http://www.team.net/pipermail/shop-talk</a>
<a class="moz-txt-link-freetext"
href="http://autox.team.net/archive";>http://autox.team.net/archive</a>
</pre>
</blockquote>
<br>
</body>
</html>
--------------90DAD5FE408838C33255CBCE--
--===============7536119164929017794==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
--===============7536119164929017794==--
|