So, the garage had part of the floor covered with vinyl tile.
No sweat. Bought a floor scraper from Harbor Freight. Nice tool. Very
sharp, thick blade on the end of a pole. Good for smooth concrete subfloors.
Now I'm moving to the bathroom, which isn't over a slab--it's hung off the
side of the building over a crawlspace. Which means a wood subfloor.
The scraper is too sharp. The vinyl tile is at least two layers deep (they
just tiled over the old tile) and it flexes. So running the scraper over
it, it either bites into the tile and binds up (it can't bear against the
rigid concrete subfloor), or it bites into the wood floor itself.
I need...a dull(er) scraper. Maybe. Something I can lever under the tile
that won't bite into the wood or tile. Or do I just need something else?
Or...how can I remove vinyl tile from a wood subfloor? The tile is so old
that it's disintegrating and I can't pull it up a tile at a time. But it's
also too crumble-y to try to get a piece at a time--it's take months just
to do the 10-by-6 area.
Looking for advice--the garage mahal has a bathroom, and it's going to be
awesome. As soon as I get this vinyl tile up.
Scott
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|