Tim,
this might work well for you...
http://jniolon.classicpickup.com/horn.jpg
john
----- Original Message -----
From: "Tim" <tputland@charter.net>
To: <ejrussell@mebtel.net>
Cc: "Randall" <TR3driver@ca.rr.com>; <shop-talk@autox.team.net>
Sent: Sunday, August 19, 2012 3:39 PM
Subject: Re: [Shop-talk] wiring question
> Yea, I have a 20 amp inline fuse. Sorry for the NooB confusion!
> tim
>
>
> On Sun, Aug 19, 2012 at 3:30 PM, ejrussell@mebtel.net wrote:
>
>> Clarify: I saw 'fuse link' and thought a length of wire with an in-line
>> fuse holder (replaceble fuse). A 'fusible link' is a length of wire that
>> is meant to melt & break the connection in the event of an overload. What
>> you want (I assume) is an in-line fuse, not a fusible link. Eric Russell
>> Mebane, NC
>>
>>>> I want to wire in an aftermarket horn on my Jeep. The wires that came
>>>> with the swith are 16 gauge. The Fuse link I bought to wire into this
>>>> set up is a thicker gauge.
>>>> Is this ok?
>>>
>>> Not really. The fusible link will not protect the wire. Either use
>>> larger
>>> wire or a smaller link.
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/jniolon@att.net
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|
