At 11:42 AM 4/20/2012, John Niolon wrote:
>Ibve got a Quincy 310 compressor sitting on a 80 gallon tank... using a 5 hp
>motor. Itbs turning about 800 rpm the rating is 3.9 to 9.6 ACFM @
175psig
>with a 2-3 hp motor...
>Ibm wondering if it will handle a small (bench top) or small upright sand
>blast cabinet without laboring it to death
John,
For starters compressors are a lot like computer memory, disk size, and money;
you never have enough.
That said, I run a blast cabinet and a pressure blaster (not at the same time)
with my craftsman 30 gal, 5 hp 110psi compressor. I can blow more air than my
compressor can make, so every 5 to 15 minuites I have to take a break and let
the compressor catch up.
But one thing no one has mentioned, is the size of the nozzle. For a
hobbiest,
use the smallest (dia.) you can get. Then as it wears, and opens,
you will use
more and more air. You blasting will get slower and slower.
John
John T. Blair WA4OHZ email: jblair1948@cox.net
Va. Beach, Va Phone: (757) 495-8229
48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V (B1106)
75 Bricklin SV1 (#0887) 77 Spitfire 71 Saab Sonett III
65 Rambler Classic
Morgan: www.team.net/www/morgan
Bricklin: www.bricklin.org
If you can read this - Thank a teacher!
If you are reading it in English - Thank a Vet!!
From Dennis Prager - The American Trilogy:
e pluribus Unum, "from many, one."
In God We Trust
Liberty - the power of choosing, thinking, and acting for
oneself; freedom from control or restriction
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net
|