That would work, but it is a pain to store. I used to have it mounted to
a pallet, but that got to be a pain and that is why I made this mount.
Moose
"Be as beneficent as the sun or the sea, but if your rights as a rational
being are trenched on, die on the first inch of your territory." Ralph
Waldo Emerson
pethier at comcast.net
02/26/2011 18:32
To
eric at megageek.com
cc
shop-talk at Autox.Team.Net, "David C." <cavanadd at frontier.com>
Subject
Re: [Shop-talk] Tire changer mount, the conclusion
What about attaching it to a panel big enough to stand on? Panel needs to
be strong, and need not be attached to the floor or anything else.
Remember the forces you put on the machine while operating it are all on
your feet through your body.
There would be no lateral forces between the panel and the floor. I'm
thinking maybe a couple of pieces of 3/4" plywood sandwiching some 2x4s.
Through-bolt the machine to the top plywood with huge washers or a
substantial backing plate, then build the rest of the panel.
Phil Ethier West Side Saint Paul Minnesota USA
1973 Triumph Stag LE22439UBW "uncle jack"
2004 Suburban 8.1
2005 Lotus Elise
2007 Saturn Ion 3 2.4
pethier [at] comcast [dot] net
http://www.flickr.com/photos/pethier
http://www.triumphtransamerica.org
http://www.mnautox.com
|