Thanks John. I've done a fair amount of surfing on it, but everything I can
remember reading dealt with fairly small parts. I made a very handy tank for
some medium-sized parts out of a large plastic container and some rebar, but
have never attempted anything this large. But for the record, "this large" is
not all that big. The entire trunk lid would fit in a container 4' x 3' x
18".
I will do a little more surfing.
> From: jniolon at bham.rr.com
> To: jandkstone99 at msn.com; shop-talk at autox.team.net
> Subject: Re: [Shop-talk] Electrolytic Rust Removal on a large part
> Date: Wed, 16 Feb 2011 12:33:33 -0600
>
> another thought Jim...
>
> you might not be able to find a kiddie pool affordable with the side wall
> height you need for the trunk lid.. another option would be scab together a
> frame of plywood the depth you need and line with with polyethylene to make
> your own tank... with a little care and not poking holes in it with the
> truck lid it would work find.
>
> lots of info on the net on electrolysis rust removal including primers on
> tank building, anodes and voltage/amperage requirements.... Google is full
> of it
>
> john
>
>
> ----- Original Message -----
> From: "Jim Stone" <jandkstone99 at msn.com>
> To: <shop-talk at autox.team.net>
> Sent: Wednesday, February 16, 2011 11:40 AM
> Subject: [Shop-talk] Electrolytic Rust Removal on a large part
>
>
> >I have a spare trunk lid that I would like to use on a restoration
project.
> > The original lid has a fair amount of damage to it and it seems like it
> > would
> > be easier all around to just replace it. However, like the rest of the
> > car,
> > the original is completely rust free. The other lid is in very good shape
> > and
> > definitely usable (I dont remember where I picked it up, but think it
has
> > been in storage for a long time), but it does have some of the usual rust
> > that
> > I can see around the lower edge in the inside. Plus, there is lots of
rust
> > dust that comes loose when I tip it on its side, so I know it is forming
> > within the inner frame where I cant see it.
> >
> > Id love to just take it to a stripper and have it dipped, but there are
> > none
> > around here. On the other hand, it wouldnt be too difficult to find some
> > sort
> > of large trough (maybe even a kiddie swimming pool) that I could convert
> > into
> > an electrolytic rust removal tank big enough to handle the lid. I am in
no
> > hurry and it could cook in there for weeks if necessary. Ive had great
> > success with this method for small parts. Is this a dumb idea? Is it
> > feasible
> > for something this large? Would my 30 year old battery charger (2/10/50
> > amp
> > circuits) be enough for the job?
> >
> > Any thoughts and recommendations will be appreciated.
> >
> > Thanks,
> >
> > Jim
> > _______________________________________________
> >
> > Shop-talk at autox.team.net
> > Donate: http://www.team.net/donate.html
> > Suggested annual donation $12.96
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
> > http://autox.team.net/mailman/options/shop-talk/jniolon at bham.rr.com
> >
> >
> >
> > -----
> > No virus found in this message.
> > Checked by AVG - www.avg.com
> > Version: 10.0.1204 / Virus Database: 1435/3447 - Release Date: 02/16/11
|