Strength of steel in flexure and shear is all proportional to its
strength in tension. Not that grade 5 bolts aren't used in automobiles
mainly in places where they are in tension and not shear, but there are
other factors involved.
> At 08:09 PM 12/21/2010 -0600, John Innis wrote:
>> The bolts an my Ariens are definitely grade 5. They are even called
>> out that way in the parts manual. I suspect there is enough load on
>> these that a regualr bolt would not last long in this application.
>>
>> On Tue, Dec 21, 2010 at 7:44 PM, Karl Vacek<kvacek@ameritech.net> wrote:
>>> They shouldn't be Grade 5 or any high-strength material - Grade 5 is tough,
>>> resisting breakage despite bending.
> I've been under the impression that Grade 5 bolts are rated for
> tension, not for shear. And certainly not intended to be bent.
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
>http://autox.team.net/mailman/options/shop-talk/bjshov8@tx.rr.com
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.872 / Virus Database: 271.1.1/3330 - Release Date: 12/21/10
>13:34:00
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|