> There is a slight angle to the overflow fitting, but there's really no way
> around that with the shape of the barrel. Even still, the pressure is
> sufficient to force a stream of water shown in the other picture.
Though if the angle has the hose arced up above the surface of the water,
it's effectively capped. For the wter in the drain hose will not rise
higher than the surface of the water in the barrel.
It doesn't appear to be enough of an angle or height to me, but perhaps it
really is.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|