if'n it were me... I'd do all the raw materials first with a roller or spray
coat or two... then after the fence was erected, I'd go back over the cut ends
and then give it a light 2nd spray coat...
john
----- Original Message -----
From: Patton Dickson
To: john niolon
Cc: shop-talk
Sent: Tuesday, April 15, 2008 1:23 PM
Subject: Re: [Shop-talk] Staining a new wood fence
From scratch, 8ft side by side with a kicker board
On Tue, Apr 15, 2008 at 12:51 PM, john niolon <jniolon@bham.rr.com> wrote:
are you going to build from scratch or buy the prebuilt sections ???
john
--
Patton Dickson - http://Austin-Healeys.com - Plano, TX
1957 Austin-Healey 100-Six "Built to run 'til the road wears out."
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|