I've used an impact by holding my hand around the stud remover to dampen the
blows.
An air ratchet works much better.
Les.
I need to strip a dozen aluminum heads for the scrap drive.
I use a socket style stud remover with jaws inside to unscrew the 20
or so studs in each head.
but, they require a hand ratchet, impact gun "bounces" or wibbles
back and forth and releases the jaws , so the socket just spins.
what can I use for a power tool that maintains constant pressure?
I have some electric drills, but they dont have enough torque to spin
out the studs, unless i pre-loosen them with the ratchet.
thanks
Skip
Nothing is as it appears
Skip Albright salbrigh@nycap.rr.com
Les
apexautoeng.com
************************************** Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
_______________________________________________
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
|