To: | "John T. Blair" <jblair1948@cox.net>, shop-talk@autox.team.net |
---|---|
Subject: | Re: [Shop-talk] hole sawed 1/4" thick steel post undersized |
From: | Steven Trovato <strovato@optonline.net> |
Date: | Mon, 09 Jul 2007 20:57:58 -0400 |
When you figure in the thickness of the saw blade, the plug will be too small. It will drop right into the hole. >Why not take the saw you used to cut the original hole, and cut a piece of >wood? This would give you a plug to insert into the hole, and a pilot >hole. Then you could go in with a slightly bigger hole saw and cut a >larger hole. _______________________________________________ Shop-talk mailing list http://autox.team.net/mailman/listinfo/shop-talk |
Previous by Date: | Re: [Shop-talk] hole sawed 1/4" thick steel post undersized, John T. Blair |
---|---|
Next by Date: | Re: [Shop-talk] hole sawed 1/4" thick steel post undersized, John T. Blair |
Previous by Thread: | Re: [Shop-talk] hole sawed 1/4" thick steel post undersized, John T. Blair |
Next by Thread: | Re: [Shop-talk] hole sawed 1/4" thick steel post undersized, John T. Blair |
Indexes: | [Date] [Thread] [Top] [All Lists] |