On Saturday 18 September 2004 08:25 pm, John Miller wrote:
> So...a poll/survey of sorts:
>
> b) If you do hang tools on the wall, what is your choice of hardware to
> do so? Are you a generic pegboard-and-bent-wire-hangers type, or do you
> have some more specialized stuff that you favor?
I use a mixture of both, drawers and hanging. For hanging I recommend that
you use plywood on the walls and skip pegboard. Most tools, sockets, and
wrench's have holder that can be screwed into a plywood wall. That way you
can put what you want where you want. If you must have a pegboard type tool
holder do what I did. I cut off the things that stick through the pegboard
and welded a small piece of metal to the back which I drilled a couple of
holes. Then I screwed that to the wall. It works great a wood covered wall!
BTW, a nice toolbox is good also.
_______________________
Bill Gilroy
77 MG Midget
"life's journey is not to arrive at the grave safely in a well preserved body,
but rather to skid in sideways, totally worn out, shouting " holy sh*t...what
a ride!"
|