How tall is it? If > 7'8" could you lay it on it's side?
I don't have a tape measure with me now, so I can't measure my TF now. I'll do
it tonight. I know the bed is 50" wide and I'd guess that the rear fenders
would add about 12" on each side of the bed. Assuming that 74" is the same as
the front fenders and add another 2" for the front bumper on each side that
would be 78" or 6"6". Leaves 14" total, all on one side if you park the truck
all the way to the other side. You might have to put down a couple of 2x4s on
the floor to act as a guide. The side window is about 4" back from the max
width point. Do you have any friends that are skinny enough to get out thru
the side window in about 18"?
-----Original Message-----
From: Blaine & Maggie Dumkee [mailto:bmdumkee@auroranet.nt.ca]
Sent: Wednesday, March 05, 2003 1:26 PM
To: Oletrucks@Autox.Team.Net
Subject: [oletrucks] TF Truck width
Anyone have a TF truck and tape measure handy? How wide is a TF truck?
I am looking for a winter storage solution for my truck and I have found
some used sea cans 25 miles away from where I will be storing my truck next
winter. The Sea can is 7'8" inside.
I think the truck will fit inside, but how will I get out if I drive it in?
Used sea can, that is wind and water proof,
20ft long $2000 CDN
40ft long $2500 CDN
Blaine Dumkee
Fort Smith NT
Canada
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|