Rock,
I've stripped my frame down to nothing except for the running boards
for exactly the same reason. Don't really know how to get them off and am
waiting to hear the answer to your not-so-stupid question.
BobK
51 3600 5-window (project)
Arnaudville, LA
I added running boards to the subject line so that this will come up in a
search of the archieves.
"Rockerfellers"
<dbr@powerweb.net> To: "oletrucks"
<oletrucks@autox.team.net>
Sent by: cc:
owner-oletrucks@auto Subject: [oletrucks] stupid
questions
x.team.net
07/11/01 11:43 PM
Please respond to
"Rockerfellers"
Ok folks time for my annual stupid question from a non-mechanic. I was
just
trying to get my running boards off and, of course, the nuts are really
rusted. Now the ruts are square and are in a deep channel...how do you get
them off? I tried a socket, but none seem to fit well enough to turn them
without stripping the corners off. I can't fit an open end box wrench on
them, the channel is to narrow and deep. And the old standby, Vice Grips,
is
to big to get in the channel. There has to be some secret for getting
running
boards off, but I haven't found it. Help!!!!!
Second question isn't so stupid. I'm thinking of changing my rear gearing.
Has anyone ever changed out the gears? I read in a suppliers catalog that
you
can buy a kit to upgrade the gear ratio, but being mechanicly challanged
I'm a
little leary of doing this by my self. Second option is to change out the
rear clip with another, but I'd rather leave my transmission in place and
just
be able to pull the old and drop in the new. Is this doable? And if so
what
type of rear clip works?
John "Rock" the mechanically challenged Rockefeller
1949 3100 "Eeyore"
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|