How do you do this? I have placed it in and spun it as much as I could. Is
there another way to adjust then other than adding another wrap and
re-hooking the J end of the spring?
Thanks
Jim House
46 Chevy 3104
Hollis, NH
-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net]On Behalf Of Kenneth Marty
Sent: Monday, April 02, 2001 6:33 PM
To: Oletrucks (E-mail)
Subject: Re: [oletrucks] repost of same question - Window Regulator 1946
Jim,
Try tightening your spring.
----- Original Message -----
From: "Jim House" <jhouse@ccsolution.com>
To: "Oletrucks (E-mail)" <oletrucks@autox.team.net>
Sent: Monday, April 02, 2001 3:52 PM
Subject: [oletrucks] repost of same question - Window Regulator 1946
> I have been driving my truck over a dirt road. It is somewhat bumpy and
> every once in a while the window will automatically roll all the way down.
> The window has new channel kit (one year old). I was told to get a new
> regulator. Well I took a look at mine and saw that it seemed to be
> controlled by a spring. So I went to the junk yard and pulled another
> spring. Swapped them out and the window is not coming down as often,
> however it is still to often. The other window stays put. Is there a way
> to tighten this down or do I need a new regulator?
>
> Thanks,
> Jim House
> 46 Chevy 3104
> Hollis, NH
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|