Try http://www.loctite.com
-----Original Message-----
From: Bill Porter [mailto:porboy298@email.com]
Sent: Saturday, August 19, 2000 10:13 AM
To: Michael Lubitz; Old chevy truck advice; WILHELM GORDON
Subject: Re: [oletrucks] Glueing on cab corners
Michael,
Have you got another address? I get a band named Locktite
with this email address.
Thanks
Bill
------Original Message------
From: "Michael Lubitz" <mlrba@texas.net>
To: Old chevy truck advice <oletrucks@autox.team.net>, WILHELM GORDON
<gvwilhelm@home.com>
Sent: August 19, 2000 12:38:36 PM GMT
Subject: Re: [oletrucks] Glueing on cab corners
Gordon,
Absolutely true. I believe Methacrylate glues are used on semis (tractor
part of tractor-trailer) to fasten parts that are designated as unweldable.
It is also used on high class boats to fasten dissimilar materials together.
This type of glue can be used structurally as well. I suggest that you try
Locktite technical help for suggestions as to product, use, and procedures.
You probably have seen or used Locktite products from the auto parts store,
but their industrial stuff is the real thing. We have had samples from
their industrial division that were amazing - even some for stainless steel.
Their web address is www.locktite.com. You will need to get hold of a real
person in their technical assistance department to make real headway and
probably will be shifted from one to another until you find the right tech
guy.
It is as strong as welding in some applications. It (obviously will not work
well in edge gluing thin pieces, but) can be used to back up edge glued
pieces. We have used it in high tech construction of homes.
Michael Lubitz
1948 Chevrolet 3100, soon to be deluxe
Austin, Texas
----- Original Message -----
From: "WILHELM GORDON" <gvwilhelm@home.com>
To: "oletrucks mailing list" <oletrucks@autox.team.net>
Sent: Saturday, August 19, 2000 12:17 AM
Subject: [oletrucks] Glueing on cab corners
> I recently overheard a couple of old hot rodders talk about using some
> type of glue to fasten new sheet metal in order to replace rusted out
> cab corners on the 50's chevy/gmc trucks. The alleged advantages
> included not having to deal with the distortion that creeps in when you
> weld and also the joint is less prone to rusting. I'm not sure if they
> were pulling my leg or not so I thought I would put it up on the list
> for discussion. Seems to me that for this type of non-structural repair
> that this is not too far-fetched an idea??
>
> Has anybody heard of this? What is the procedure and what type of glue
> is used?
>
> Thanks,
>
> Gordon
>
> '51 GMC 5 window 1/2 ton - 261 cu - 4 speed
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
-----------------------------------------------
FREE! The World's Best Email Address @email.com
Reserve your name now at http://www.email.com
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|