nobbc
[Top] [All Lists]

Re: [Nobbc] Need advice

To: North Bay British Car Club <nobbc@autox.team.net>
Subject: Re: [Nobbc] Need advice
From: gtwincams <gtwincams@pacbell.net>
Date: Tue, 07 Oct 2008 17:05:54 -0700
Hi Rich,
Ouch, that's a bummer. Starting with the obvious, was the easy-out you 
used high-quality, not a Chinese one? If not, try getting a really good 
US made tool. There are also a couple of profiles; square and 
reverse-twist. Try them both. One trick is to use a reverse-twist type 
with Locktite, get the tool to bite into the brass, and let it set up 
before trying to extract.
Obviously, it would be a problem to try to drill or tap the brass, since 
shavings will enter the block. Also, don't apply any heat to the brass 
fitting - that will make it expand in the hole. You can, if you are 
careful (watch out for gas, oil, etc.), apply a bit of heat to the block 
about 1/2" around the fitting - that can help break loose the tight fit 
between the threads of the block and fitting. Don't overdo the heat.
Good luck,
Greg Tatarian



rmossholder@comcast.net wrote:
> Hello,
> I seem to have screwed up. Last weekend I was working on the '71 Spitfire and 
>noticed a small leak coming from the oil pressure sender. I have installed an 
>oil pressure gauge in the car and for some reason the brass adapter fitting 
>came loose. I removed the sender from the brass fitting and tightened the 
>fitting back into the block. To make a long story short I sheered off the 
>fitting in the block. No problem I thought, Just use an easy-out and it'll 
>come right out. As soon as I applied any torque to the easy-out it shattered 
>and left a large piece in the fitting. I managed to get the remaining pieces 
>of the easy-out out of the brass fitting. Does anyone have any suggestions as 
>to how to remove the rest of the brass fitting?
> Thanks,
> Rich M
> _______________________________________________
> Nobbc mailing list
> Nobbc@autox.team.net
> http://autox.team.net/mailman/listinfo/nobbc
_______________________________________________
Nobbc mailing list
Nobbc@autox.team.net
http://autox.team.net/mailman/listinfo/nobbc

<Prev in Thread] Current Thread [Next in Thread>