Most likely a poblem with the flasher unit going power on okay, but
not flashing.
See circuits for Switched On And Fused here:
http://MGAguru.com/mgtech/electric/circ_f1.htm
http://MGAguru.com/mgtech/electric/circ_f2.htm
Testing the Flasher Uit here:
http://MGAguru.com/mgtech/electric/et104.htm
If all that checks out, then Testing the Turn Signal Relay here:
http://MGAguru.com/mgtech/electric/et105.htm
At 08:31 PM 9/28/2025, dave northrup wrote:
>Content-Language: en-US
>Content-Type: multipart/alternative;
> boundary="_000_5d3ef42dd20640d5b7f299da6c38f661ranteercom_"
>
>Brake lights work
>
>
>
>Front parking lights and headlights work
>
>
>
>Rear parking lights do not work
>
>
>
>Blinker turns on both front and back, solid (no blink), on each side
>correctly, for the duration of the switch movement until it turns itself off
>
>
>
>The blinker filament and the stop light filament are the same, right?
>
>
>
>Trying to figure out where to start trouble shooting with the multi meter.
>_______________________________________________
>
>Mgs@autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested annual donation $12.75
>
>Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
>
>Unsubscribe: http://autox.team.net/mailman/options/mgs/barneymg@mgaguru.com
--
This email has been checked for viruses by AVG antivirus software.
www.avg.com
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|