Morning Friends,
Now that the TD's engine room is wired, its time to mount the accelerator pedal
and complete the carbs. I had purchased new screws for the linkage bits but
they are a tiny bit too large. The old screws are chewed up and ugly. I'll make
another trip out to the hardware store today and purchase B slightly smaller
screws. I can the assemble the linkage properly.B
I also need to set the float levels (to 3/8") and install the plumbing
correctly. I still need to flush out the fuel line back to the tank. Its been
sitting open for a few months now.
After the line is clear I may paint the spare tire carrier so I can mount the
fuel tank. That's a stretch-goal for the day.
More later,
-rick
PS: No, I don't have another life. :-)
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|