This answered what I was trying to ask. That is what I was trying to ask
about, the notches, mine was installed correctly around. Just wanted to
confirm before I re-installed it.
Bill
-----Original Message-----
>From: Barney Gaylord <barneymg@mgaguru.com>
>Sent: Sep 10, 2010 4:51 PM
>To: Bill Mills <bmills46@earthlink.net>, mgs@autox.team.net
>Subject: Re: [Mgs] Radiator (metal) fan blades, which way?
>
>Any curved fan blade goes with the convex side forward.
>
>Early MGB metal blade has notches in the forward edges to clear the
>rearward extending bottom tank of the radiator. See here:
>http://mgaguru.com/mgtech/cooling/pics/b_fan.jpg
>
>Barney Gaylord
>1958 MGA with an attitude
>http://MGAguru.com
>
>
>At 11:52 AM 9/10/2010 -0400, Bill Mills wrote:
>>.... I could not decide which way around the 6 blade metal fan
>>should be attached. The metal fan blades are cut such that there is
>>a "cut away" side to each blade. Should this "cut away" side be to
>>the front (radiator side) or to the back (block side)?
>>....
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|
