By chance do you think they have the orig heads ? if so there is a
casting number on the top . this can give you the engine series that
they were fitted to , from there you can match the years. it is a
start.
>I have two engines I'm trying to I.D. the year of. One has three piston
>rings,the other has four. I believe their both early seventies. The number
>plate is missing on both. They were both bored .20, tanked. and shotpiened at
>a local mechine shop and the fellow I got them from didn,t take the plates off
>or write the numbers down before he had it done.
>
>
> Any help would be
>appreciated
>
>
>Steve
>_______________________________________________
>
>Mgs@autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested annual donation $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe: http://autox.team.net/mailman/options/mgs/paul@ece.rochester.edu
--
Paul Osborne
University of Rochester
Engineering & Technical Services
Department of Electrical and Computer Engineering
201 Hopeman Bldg River Campus
Rochester, New York 14627
585-275-5226
paul@ece.rochester.edu
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|