mgs
[Top] [All Lists]

Re: [Mgs] New Wiring Harness

To: "Douglas Gaither" <dbg.lists@gmail.com>
Subject: Re: [Mgs] New Wiring Harness
From: "Paul Hunt" <paul.hunt1@blueyonder.co.uk>
Date: Tue, 13 Apr 2010 08:47:09 +0100
Yes, just an in-line, with two bullets, inserted where the rear harness 
joins the main harness in the mass of connectors by the fusebox, it's how 
they were fused from 67 until 70 and the four-fuse box.  Same for the pump. 
Standard 17 amp rated 35 amp blow for both will be fine, it's there to 
protect the wiring so the current consumption of lamps and pump is 
irrelevant, and should one blow there are (or should be) two spares in the 
fusebox anyway.

PaulH.

----- Original Message ----- 
>I was considering an entire new harness because I have the blessing  from 
>my wifey to do so.  I do realize this is a rather involved  undertaking and 
>so I would still consider either repairing the damage  or replacing the 
>rear harness.
>
> Either way, I like the idea of fusing the rear part of the harness,  what 
> size fuse would I use?  Would you suggest just an inline fuse?
_______________________________________________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>