I had a release bearing fail and replaced the clutch, and annoyingly had
clutch judder when I didn't have it before, manoeuvring slipping the clutch.
I found that using revs slightly higher than otherwise I would have controlled
it, and lived with it. Some 50k miles later it still does it a bit but not as
much as originally. FWIW when I had oil contamination on a classis Mini there
was no judder, the clutch was just either in or out so I needed a lot of revs
to prevent stalling.
You don't say how old the clutch components are, doing a standard clutch
change would almost certainly change its behaviour, but only when you can't
live with it any longer.
PaulH.
----- Original Message -----
My 67 Austin Ute is starting to get clutch shudder when taking off in 1st
gear.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|