Tom:
Your car will have a mechanical combination water temp and oil pressure
guage.
It doesn't have a temp sender, but a capillary tube unit that screws
into the head. If this is damaged, the guage needs to be either replaced
or rebuilt.
New gauges run about $170 for a replacement design. You may be able to
get your original rebuilt for less by companies such as Momar in Alb.
N.M. or Nisonger Instrument Rebuilding on the East Coast.
The head gasket set comes with intake/exhaust gasket and all the other
gaskets you need to R/R the Head.
This gasket set is available from a number of suppliers, including Moss
Motors.
http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=29210
Item 1A
Kelvin
> -----Original Message-----
> From: mgs-bounces+doddk=mossmotors.com@autox.team.net
> [mailto:mgs-bounces+doddk=mossmotors.com@autox.team.net] On
> Behalf Of Tom Gunderson
> Sent: Monday, July 21, 2008 4:49 PM
> To: Mgs@autox.team.net
> Subject: [Mgs] 1500 MGA gaskets
>
> Hi, I need a gasket set for the replacement of my 1500 head.
> This gasket set also needs to include the intake / exhaust
> gaskets. I also need a temp sensor. The old one stuck and
> broke off. Can anybody out there give me some guidance?
> Thanks, Tom G.
> 1957 , 1500 MGA rst
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|