mgs
[Top] [All Lists]

Re: [Mgs] MGA Head Differences

To: WSpohn4@aol.com
Subject: Re: [Mgs] MGA Head Differences
From: Jim Juhas <james.f.juhas@snet.net>
Date: Thu, 28 Feb 2008 22:27:38 -0500
The only pistons I have seen are flat or dished.  Are there domed 
pistons available?  I don't expect there were any domed stock ones.

Jim

WSpohn4@aol.com wrote:
> 1500/1600 are small valve small combustion chamber heads.  1622/1800 
> are larger valve and chamber. They can be used on the smaller 
> displacement engines but require higher compression pistons or you'll 
> end up with very low compression.
>  
> Bill
>  
> In a message dated 28/02/2008 5:41:45 P.M. Pacific Standard Time, 
> james.f.juhas@snet.net writes:
>
>     I understand that the heads used on MGA 1500 and 1600 engines are the
>     same.  Is there a difference in the head used on a 1959 Magnette? 
>     Also,
>     can an MGB head be used on a 1500 or 1600 engine as a bolt-on option?
_______________________________________________
Support Team.Net  http://www.team.net/donate.html




Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>