It's just the four bolts that hold the track to the floor. They
fasten into captive or welded nuts. If you have time, give these bolts a
dose of penetrant oil as they are prone to rusting and breaking free the
captive nuts.
Bob
On Thu, 28 Feb 2008 09:07:45 -0500 "Dave Willner" <dwillner@ptd.net>
writes:
> I want to remove the seats this weekend to polish the tracks and to
> touch up
> the fames, both starting to look their age a little. Manual says
> push seat
> forward, remove two bolts, push seat back, remove two bolts....is
> this it, 4
> bolts? I assume the tracks are bolted to the seats in the middle
> somewhere as
> well? Thanks
>
> Dave Willner
> Stroudsburg, PA
> 59 TR3A Apple Green
> 70 MGB BRG
> 70 BSA 441 Victor Special
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|