I just completed the rebuild of my MGB. I rebuilt the engine and re-torqued
the head bolts after approximately 300 miles. After 2,400 miles, I just
noticed a weep of anti freeze coming from the head gasket above my spark
plugs. I have the following questions:
Is this normal or should I re-torque the head bolts? Some where I thought I
read this was normal on an MG.
If I re-torque do I do it hot or cold?
If I re-torque do I loosen all the head bolts and start over or do I re-torque
from there current torque values?
Any guidance would be appreciated. I have also included some pictures of my
restoration
Merl Rosenthal
1980 MGB
[demime 1.01d removed an attachment of type image/jpeg which had a name of
large card 003.jpg]
[demime 1.01d removed an attachment of type image/jpeg which had a name of
finish 047.jpg]
[demime 1.01d removed an attachment of type image/jpeg which had a name of
IMG_0529.JPG]
[demime 1.01d removed an attachment of type image/jpeg which had a name of
IMG_0524.JPG]
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|