RE: 79 B steering column

[Chuck Renner <crenner@dynalivery.com>]

> Let's put it this way.  In an accident it is supposed to 
> slide inwards as
> easily as possible.

Yes, hopefully easier than my ribs going the other way...  ;)
 
> Usually these shafts are really sticky from old grease.  When 
> clean they are
> a smooth fit, not an interference fit.

So there's no kind of shear pin that holds it all together?  It freely
sliding in and out is the correct mode of operation? 

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive