Also, don't forget, it is not only 1-61/64", but is also octagonally-shaped!
David
----- Original Message -----
From: "Max Heim" <mvheim@attbi.com>
To: "MG List" <mgs@autox.team.net>
Sent: Wednesday, April 30, 2003 2:41 PM
Subject: Re: mga rear axle
> Apologies, it's even weirder than I thought -- 1-61/64ths...
>
> on 4/30/03 12:05 PM, Max Heim at mvheim@attbi.com wrote:
>
> > Yeah, that would be a 1-15/16ths socket. Nice round number, that...
> >
> > on 4/30/03 11:28 AM, Dave B. Hammond at dbh@hamengr.com wrote:
> >
> >> I'm trying to undo the nuts holding the hubs on an mga rear axle. A 2"
> >> socket seemes too big and a 1 7/8" seemes too small. Any advice would
be
> >> appreciated.
> >> Dave
> >> 1622 mga
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|