Spot on. I just removed mine in my 66 roadster. The DPO had glued it
in rather than use the correct gaskets. Severall new four-letter words
were just created....
Randy
-----Original Message-----
From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net] On
Behalf Of Max Heim
Sent: Wednesday, April 16, 2003 3:57 PM
To: MG List
Subject: Re: Heater Core Removal
If you're talking about an MGB, you're not even halfway there...
You have to undo the cable from the defroster knob, or at the flap end,
if you can get to it.
You have to remove the defroster hoses from behind the console and pull
the two short tubes out of the lower half of the heater box (it extends
all the way down to the tunnel).
There may be an additional step that escapes me at present. I have tried
to erase this horrible experience from my memory. <g>
Good luck...
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|