To: | <JSGriset@aol.com>, <mgs@autox.team.net> |
---|---|
Subject: | RE: Oil pouring out from oil filter head |
From: | "Jason Dutt" <jason@markerman.com> |
Date: | Mon, 17 May 1999 13:53:41 -0400 |
Since you've done your own changes for so long, this probably isn't the case, but... I had the same problem with my 72. Turned out that either the DPO or DCO (dumb current owner <g>) cross threaded the shaft, so the filter could be screwed on two different ways: One resulting in a good seal, one resulting in a bad seal. I've since replaced the mounting. =J= |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: New MGB (fairly long), Max Heim |
---|---|
Next by Date: | Vapour lock problem. Was won't start, Jones, Mark |
Previous by Thread: | Re: Oil pouring out from oil filter head, Art Pfenninger |
Next by Thread: | Oil pouring out from oil filter head, Florrie & Allen Bachelder |
Indexes: | [Date] [Thread] [Top] [All Lists] |