Re: Polyeurothane/Delrin suspension bushings

["Steve Obert" <sobert@snetel.com>]

The delrin ar stiffer than the ployeurothane ( sp?) bushings.  I have 
made the delrin bushings my self in the past, you aren't wrong saying 
you can make them, all you need is a lathe.

A plastic supplier should have bar stock available.  I have gotten up 
to 1 1/8 inch stuff but it isn't cheap.  

I would recommend the poly bushings over the delrin for street use.

BTW if you have any play in the delrin bushings you will probably get 
klunks and knocks from them.