Some more info from Roger Parker who has a great deal of experience with these
engines:
"I can't be certain but fully expect the number is one specific for the MOD
engines as a completely separate stand alone series.
"4860 is the correct engine prefix code just for the MGB GTV8, whilst RV8 used
48A. although some of the early RV8 dev cars had a 47A engine code along with
an SPL VIN prefix."
Normally, and unlike the 4-cylinder engines with a removable tag, the V8
engine number is stamped into the edge of the flange the bell-housing bolts up
to, near the top left (facing forwards) corner. Whilst this means it cannot
be 'lost' like the tag can, I suppose it could be ground back and restamped
for good or evil reasons.
Paul.
----- Original Message -----
The engine rebuild was done by a sort of hush hush Ministry of Defense
repair outfit called ABRO Ashford so god knows what they did. I must look
for the number on the engine - where is it stamped? The engines probably were
originally in military vehicles so the numbering may be very different. So
really all I can say is that it was rebuilt in 1996 !
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgb-v8 mailing list
Mgb-v8@autox.team.net
http://autox.team.net/mailman/listinfo/mgb-v8
|