I just want to pass on an installation note for the Howe HTOB. I have
just finished installing my clutch for the forth time trying to
elliminate slipping. Each time when I installed the HTOB I relied on
the measurements and calculations to determine the number of spacers
behind the HTOB. This time I took a final measurement of the distance
from the bearing surface to the face of the transmission with the
spacers installed. I found that I still had 1/8" too much height in the
assembly. This accounts for some of the slippage I have experienced.
The rest of the slippage was due to too much horsepaower for the clutch
I had.
Anyone interested in buying a Centerforce II 10" clutch for a 302 with
700 miles on it?
--
Best Regards,
Tom
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|