mg-t
[Top] [All Lists]

Re: [Mg-t] Parking light bulbs

To: <sumton@sbcglobal.net>, <mg-t@autox.team.net>
Subject: Re: [Mg-t] Parking light bulbs
From: Mike Eldred <redscirocco@hotmail.com>
Date: Mon, 13 Jun 2011 08:56:04 -0400
I use Napa Gold 1300 filters.  They come with the three gaskets, but I've
never had a problem fitting the right one (the middle-sized one), except when
there was already a gasket in there.

A few years back I was having trouble getting the gasket to seal.  I knew I
had put in the right gasket, and I knew I had taken out the old gasket.
Nonetheless, the problem turned out to be an old gasket stuck in the groove.
I don't know if it had been in there for years and I just never had the
problem before, or if I actually didn't take out a gasket in the first place.
At any rate, I got a nice oil undercoating that day.
By the way, the easiest way I've found to probe for a gasket and get out a
stubborn gasket is with a pushpin.  Just stick it in, and if you hit metal,
you're fine.  If it sticks into the gasket, simply pull it out.

-Mike Eldred
1954 MG TF
'73 Midget


> From: sumton@sbcglobal.net
> To: mg-t@autox.team.net
> Date: Sun, 12 Jun 2011 18:18:46 -0500
> Subject: Re: [Mg-t] Parking light bulbs
>
> just changed the oil in my 52 TD - the filters I get for the cannister come
> with 3 rubber gaskets, none of which really seem to fit correctly.
>
> does anyone make just those gaskets? or is there a place to get the filter
> and gasket that seems a little more "fitting"
> ______________________________________________
>
> Mg-t@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/mg-t/redscirocco@hotmail.com
______________________________________________

Mg-t@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>