Ah, yes! Mr Kamikaze was the pilot!
--- On Tue, 20/1/09, Herald1200@aol.com <Herald1200@aol.com> wrote:
> From: Herald1200@aol.com <Herald1200@aol.com>
> Subject: Re: [Mg-t] Source of Rocker Arm Ass'y
> To: Mg-t@autox.team.net
> Date: Tuesday, 20 January, 2009, 4:28 AM
> John wrote:
>
> Anyone have experience with carb pistons that don't go
> all the way up
> in the bell (suction chamber)? Joe Curto says the piston
> only rises 3/4" to
> 1" and won't get stuck, but my mechanic says the
> car will have more power if
> the piston doesn't get stuckj when it goes all the way
> up. We are sanding
> the inside of the bell with 1000-grit paper. It takes a
> long time. Any
> suggestions?
>
>
> ==AM==
> Forgive the obvious suggestion, but is it possible that,
> somewhere along the
> line, you or a previous owner might have accidentally
> swapped pistons and/or
> domes? It might be that simple...if you're lucky! (Been
> there, done that!)
>
> --Andy Mace
>
> *Mrs Irrelevant: Oh, is it a jet?
> *Man: Well, no ... It's not so much of a jet, it's
> more your, er, Triumph
> Herald engine with wings.
> -- Cut-price Airlines Sketch, Monty Python's Flying
> Circus (22)
>
> Triumph 10 / Herald / Sports 6 vehicle consultant, The
> Vintage Triumph
> Register: _http://www.vtr.org_ (http://www.vtr.org/)
>
> Check out the North American Triumph Sports 6 (Vitesse 6)
> and Triumph Herald
> Database: _http://triumph-herald.us_
> (http://triumph-herald.us/)
>
>
>
> **************Inauguration '09: Get complete coverage
> from the nation's
> capital.
> (http://news.aol.com/main/politics/inauguration?ncid=emlcntusnews00000003)
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> Mg-t@autox.team.net
> http://autox.team.net/mailman/listinfo/mg-t
>
> Archives at http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|