Yes, it is possible to order just the light socket.
They sell them for single contact bulbs (no turn signals), part no.
157-590,
or for double contact bulbs (cars with turn signals), part no. 157-600.
There is a turn signal wiring kit available, should your car not be
equipped
with turn signals. Requires the turn signal relay box, 33117.
You have to look for where the excess wiring to the side lamps was laid.
Undo the two bolts holding the side lamp to the fender, raise it off
the fender
by 3-4 inches, and then you should be able to extract the old bulb
contact plate
from the chrome housing.
John Seim
Irvine, CA
On Aug 4, 2008, at 5:58 PM, herb strachman wrote:
> Hi,
>
> I would like to replace the parking light socket on my '53 TD. Is it
> possible
> to replace just the socket or do I need to buy the complete assembly (
> Moss
> #157-600)? If so how do I remove the socket from the assembly?
> Thanks,
>
> Herb
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> Mg-t@autox.team.net
> http://autox.team.net/mailman/listinfo/mg-t
>
> Archives at http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|