mg-t
[Top] [All Lists]

Re: [Mg-t] Plug for "Inspection Lamp Socket"

To: Bob Howard <mgbob@juno.com>
Subject: Re: [Mg-t] Plug for "Inspection Lamp Socket"
From: Mike Duvall <duvallcom@sbcglobal.net>
Date: Wed, 18 Jun 2008 12:20:22 -0500
You need 1N5401 rectifier diode 3A      100V  (radio shack or any local  
electronics parts store if you have one)   It will go in like an  
inline fuse but with polarity.

One end has a line on it and it will go to the negative side.   So on  
positive ground car,   the line side will go to the power negative  
(dash) side.   (reverse it for negative ground)

Put a 3 amp inline fuse with it.  You might consider putting the fuse  
and the rectifier behind the dash.

It is like a one way hydraulic valve.  It won't work backwards so you  
just reverse the plug.


On Jun 18, 2008, at 11:18 AM, Bob Howard wrote:

> Bob,
>    Does the use of the diode mean that if the device works it's OK,  
> and
> if it doesn't work there is no harm done -- just reverse the plug?
> Bob
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t

Archives at http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>