o.k hopefully e mail is fixed now.... sorry for the bounce backs.
thanks for all the help on the hesitation..
how much oil is required in each carb chamber... my son tells me he put a
small amount of standard 10w 40 is that o.k or should i somehow remove it...
also was looking for help on the leaky front seal it is the moss (Timkin) not
the rope seal and it was set in high temp grey silicone as it fit the crank
end seemingly snug but was loose in the groove fitment. there were no visible
wear signs on the polished end of the crank....very smooth.
thanks as always
Rocky
_______________________________________________
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|